Wax cartridge warmer, with electrical cable un

Roll-on refill heater for semi cold depilatory wax, includes thermostat for temperature control.

The red light indication indicates that the heater handle is heating up and the thermostat is on, the green light indication indicates that the thermostat is off, not producing heat.

The heater has two PTC 120°C each and the thermostat is set to reach the maximum temperature of 90°C.

Power for one handpiece is 35W and is supplied with a plastic cover to cover the top of the handpiece when it is not on.

A connecting cable is also supplied to connect the plug to the wall socket.

The plug socket is located at the back of the handle.

It is possible to fit wax refills in the following sizes: 100ml, 105ml or 110 grs.

Electrical cable length from unit to plug = 1,50 metres.

The lid dust cover must be removed when the equipment is heating up and after switching it off, while it is still hot. The lid dust cover should only be placed back when the equipment has cooled down completely. Failure to comply with this warning will damage the plastic of the wax heater and its colour.

Mossi Epil

Log in

Register



Roll-on refill heater for semi cold depilatory wax, includes thermostat for temperature control.

The red light indication indicates that the heater handle is heating up and the thermostat is on, the green light indication indicates that the thermostat is off, not producing heat.

The heater has two PTC 120°C each and the thermostat is set to reach the maximum temperature of 90°C.

Power for one handpiece is 35W and is supplied with a plastic cover to cover the top of the handpiece when it is not on.

A connecting cable is also supplied to connect the plug to the wall socket.

The plug socket is located at the back of the handle.

It is possible to fit wax refills in the following sizes: 100ml, 105ml or 110 grs.

Electrical cable length from unit to plug = 1,50 metres.

The lid dust cover must be removed when the equipment is heating up and after switching it off, while it is still hot. The lid dust cover should only be placed back when the equipment has cooled down completely. Failure to comply with this warning will damage the plastic of the wax heater and its colour.

Mossi Epil

Share on social media